How to install your new Decal

---

• Before application place decal on a hard smooth surface face up and rub over the decal with a credit card, squeegee or your thumb rub firmly with heavy pressure.
•  Clean surface thoroughly with alcohol then a clean dry cloth or paper towel. 
•  Starting at a corner SLOWLY Peel off the backing AT A ANGLE away from the installation tape, IF ANY PART OF THE DECAL remains attached to the backing paper as you are peeling it away lay the tape back down on to the backing and firmly re-rub over the decal. If the backing paper tears and sticks to the decal, carefully peel the stuck backing paper away from the decal before installing.  Once decal is removed from the backing paper move on to next step. 
•  Place the decal on the glass or other smooth surface where you want it to stick, IT WILL STICK INSTANTLY. 
•  Rub over the installation tape with a credit card, Squeegee or your thumb using heavy pressure working out any bubbles that may have formed while placing the decal on the surface. 
•  Wait a minute or two to let the adhesive bond 
•  Slowly peel off the installation tape pulling gently at a angle. (if the decal tries to stay attached to the installation tape lay the tape back down and apply heavy pressure using your thumb, a credit card or squeegee) 

 Surface temperatures should be between 50 and 90 degrees Fahrenheit before attempting the installation. As a general rule, if the surface is hot to the touch it’s over 90 degrees Fahrenheit. Adhesive becomes brittle when it gets too cold and gummy when it gets too hot. Applications outside the recommended range of 50 to 90 degrees Fahrenheit reduce the adhesives’ ability to perform.